The specific operating procedures of the high-speed automatic ink printing machine are as follows:
Pre-production operation specification
1. Carry out the following routine inspections on the machine;
(1) Check whether there are other items in the unit and the workbench.
(2) Check whether the oil level is normal.
(3) Wipe and check the plate for damage.
(4) Run the machine to check whether there is any abnormal noise.
(5) Each lubrication point must be filled with oil once.
2. Understand the operating status of the equipment, and run the machine to check whether there is any abnormal noise.
II. Production preparation
1. Check the handover record,
When you arrive at the production order, first check whether the order is correct, and understand the process requirements, production quantity and precautions of the products to be produced. The two-shift printing jobs should be marked on the printing surface to trace quality problems.
3. Prepare raw and auxiliary materials according to the specified order.
4. Carefully read the product specification sheet to understand whether the product has special requirements:
(1) Whether online glazing is required;
(2) Whether die cutting and die cutting requirements;
Verify whether to print first or touch the line first;
2. Check the production of cardboard to see if it needs to be printed in batches to avoid the occurrence of defective products; (It is strictly forbidden to sit on the cardboard or press it by hand , so as to avoid local depression and affect printing)
3. Set the ink volume and ink viscosity in advance according to the printing color needs; , Correctly adjust the machine pressure, printing speed, slotting position, and reasonably arrange the color sequence.
Operating Specifications in Production
2. Check the following aspects of the packing box with reference to the approved draft or approved sample:
; (3) Box size; (4) Whether the picture and text are complete
3. Check the picture and text as follows:
(1) Off-script check (out of the signed draft) read through line by line; avoid mistakes in the signed draft itself; (2) Check against the signed draft or sample;
4 , During the production process, check at any time to check whether there is any displacement, whether there is color difference, whether the pictures and texts are clear and short, whether there is a burr or tear on the edge of the slotted forming blade, whether the lid is formed with overlapping seams, whether the pressing line is correct, and whether the pressure is correct. Suitable. If there are quality problems, they will be dealt with in time, and the defects will be marked to facilitate the detection of them in the subsequent process.
5. During the process of loading the cardboard, the cardboard staff shall strictly check and control the quality of the cardboard. for other use.
6. Stop the machine immediately if the following problems are found: (1) There is a large color difference and no ink; (2) The picture and text are defective or there is a problem with the printing plate; (3) The printing surface Dirty; (4) The machine is faulty;
7. Observe whether there is any problem with the machine at any time during production, and guarantee it in time.
8. If it is found that the material problem cannot be solved on the spot, the production should be stopped and reported to the quality inspector, so that the relevant departments can solve it and prepare for the subsequent production.
Operation Specifications After Production
2. The captain arranges personnel to clean and maintain the machine in accordance with the "Machine Maintenance System". 3. Cut off the power supply and airflow.
